How To Double DJ
This is a guide on how to double DJ on any Windows OS including Vista.
Step 1: You will need to download the following program: http://www.megaupload.com/?d=G3QDCCUX
This file can be opened with a program such as WinRAR, you can download this here.
Step 2: Once you have downloaded the files, run the file setup.exe and begin your installation. (You may choose to extract the files to somewhere you can remember for future reference but it's not vital)
After it is installed you will need to restart your PC. You will not be able to go any further without doing so.
Step 3: When you have restarted open up the program called Virtual Audio Cable Control Panel. If you cannot find the program search your computer and it should come up.
Under Driver parametres set the number of cables to 4:
Then Click run. Once you have done this you will not need to set it up again when you use the program.
Step 4: Next, open up the program called Audio Repeater 4 times. These must remain open throughout the time you DJ and need to be set up each time.
The first Audio Repeater should be set up like so:
Make sure that all of the Line In and Line Out setting are correct and that you click start on all of the Audio Repeaters.
Step 5: Go onto the skype options, then audio settings. Putthe speakers on Line 2 and make sure the "Automatically adjust microphone setting is unchecked, if ticked this can affect your mic volume dramatically on air.
Step 6: Finally on SAM broadcaster click Config on your Voice Fx box and select Line 3 as the soundcard device (note this is for sam2, sam3 will look different):
That's it, you are ready to double DJ. Your SAM broadcaster should now pick up anyone on the other end of a skype call in very good quality.
NOTE: I did not make this guide, my mate sent it to me in a .doc